The Sniper’s Edge is an Awesome Hockey Targeting System that Offers Plenty of Versatility

A few months ago, I got my hands on the Sniper’s Edge from HockeyShot. I had seen this Hockey Targeting System in the past, but hadn’t ever used one before. So, I was excited at the chance to give it a whirl, and was impressed with the experience.

Product Overview
The Sniper’s Edge fits over any standard two-car garage door opening, and comes in 2 sizes, 7′ x 16′ or 8′ x 16′ (so make sure you measure the height of your garage door before ordering).

The unit comes tightly wrapped in a box – make sure you follow the labeling and DON’T USE A KNIFE TO OPEN THE BOX, as you will risk slicing a hole in your tarp before you even get it open.

Installation
The Sniper’s Edge doesn’t come with any of the necessary hard-ware to install it. So you’ll need to pick up the following items from Home Depot or Lowe’s:

• Screws
• Washers
• 16′ wooden dowel

Once you have the proper hardware, assembly is pretty easy… Just follow the directions included in the box. I put it up myself in about 22 minutes, and it would have been a lot quicker if I had had a partner.

My Experience
Once your Sniper’s Edge is all set up, just grab a Shooting Pad, some Pucks, and have at it! This set-up works really well in neighborhood or indoor settings, where you don’t want errant pucks damaging houses, windows, or other valuable items. The Sniper’s Edge is a tarp, so everything hits with a dead bounce and drops straight down.

Another cool feature on the Sniper’s Edge is the pocketing system. Anytime you snipe a corner, the puck is caught in the back pocket, and drops down to the bottom of the unit, making clean-up easy (as long as you’re hitting the corners!).

All in all, this is a great product, and one I highly recommend!

Technorati Tags: Bounce, Car Garage, Garage Door, Hardware Assembly, hockey shooting aids, hockey shooting targets, Home Depot, Indoor Settings, Lowe S, Neighborhood, Product Overview, Proper Hardware, Puck, Pucks, Screws, Shooting Targets, Sniper, Targeting System, Tarp, Versatility, Whirl, Wooden Dowel

Perpetual Breakout Drill Mimics Passing Patterns Often Encountered in Games

The Perpetual Breakout is a great drill to develop hockey breakout abilities in a high-tempo, flow and timing setting. Here’s what the drill looks like:

Perpetual Breakout Explanation:

1. “Ghost man” passers start the drill by shooting then picking up a puck behind the net to initiate the breakout
2. Low forward simulates winger, and swings in to pick up board-side breakout pass
3. High forward swings through and acts as the centerman providing middle support
4. winger one-touches to center, who attacks and shoots, then initiates breakout in far zone
5. winger moves to middle line.

NOTE: winger can swing from top down, or from bottom up, depending on your team’s breakout set up.

Technorati Tags: Acts, Angling, Breakout, Games, Ghost Man, Hockey Drill, Mimics, Puck, Skill Level, Swings, Tempo, Winger, Zone 5

Train Yourself to Rely Less on Seeing the Puck

HockeyVision Training Pucks are a great way to train yourself to rely less and less on seeing the puck, which will then allow you to stickhandle with your head up, enabling you to see more of the play.

HockeyVision Training Pucks are white, with a black dot in the middle. The black dot comes in three sizes (large, medium, and small). The idea is to work your way down from the large, more-visible dot to small, less-visible dot, training your eye to not have to see as much of the puck while stickhandling.

These pucks are available in on-ice and off-ice models. The on-ice pucks are made of rubber (same as a regulation puck), and the off-ice ones are made of a high-density plastic (HDPE if I’m not mistaken), which allows them to slide really well on flooring tiles or a skill pad.

Enjoy!

Technorati Tags: Black Dot, Density Plastic, Flooring Tiles, Hdpe, High Density, Models, Puck, Train

Introducing… the Best Hockey Passing Rebounder on the Market!

Over the past few years, a number of Hockey Passing Rebounders have made their way to the off-ice training market. These rebounders offer many fun and effective ways of working on your passing both on and off the ice, and I highly recommend owning one.

The passing rebounder I want to show you in this post is by far and away the best one on the market today. The X-Passer is a heavy-duty, versatile passing rebounder, that has improved on some of the design flaws of other rebounders that are currently on the market. It’s a lot of fun to use, and it works REALLY well. I’m excited to show you what this is all about, so let’s jump straight in!

First Impressions and Design Features:
The first thing that struck me about the X-Passer was it’s weight. This thing is heavy duty! It’s obvious that XHOCKEYPRODUCTS intended this to be used with real pucks, and full-speed passes. The weight and design of the X-Passer make it so you can literally throw it down in the middle of the floor, and fire hard passes at it… and it won’t move around on you. This feature allows you a lot more placement and configuration options, and definitely beats the “clip on” rebounders!

Next, the X-Passer uses a bungee system as its rebounding mechanism. This helps to keep the rebounds true and flat. In fact… it’s almost impossible to have a puck flip up on you, even with HARD passes (something other rebounders have been known to have issues with). So long as you’re sending it in flat, it will always come back at you flat and hard.

Third, the X-Passer has a “retractable spiking system” which allows for easy conversion for on-ice use. All you do is twist the screws in the top of the X-Passer, and spikes pop out the bottom. This feature can open up all kinds of new doors for creativity in practices!

Using the X-Passer:
The X-Passer is a blast to use. It’s a lot of fun when things “just work” the way they’re supposed to. I use the X-Passer to work on pretty much every type of pass; forehand and backhand “cushion and sweep,” touch passes, you can even get creative and combine it with other products to work on your saucer passes!

Conclusion:
A few people have asked me if the X-Passer is worth the higher price when compared to some of the other, “cheaper” rebounders on the market. In my mind, if you’re serious about your off-ice training, it’s absolutely worth paying a premium for a product that is going to work the way it’s supposed to, and last as long as you’ll need it to. When you pick up your X-Passer, that’s exactly what you’re getting!

Technorati Tags: Blast, Configuration Options, Conversion, Creativity, Design Features, Design Flaws, Doors, First Impressions, Full Speed, Heavy Duty, hockey passing rebounder, off-ice hockey passing, Pop, Puck, Pucks, Rebounders, Rebounds, Screws, Spikes, x-passer

A few Offensive Zone Faceoff options that have worked well for me in the past

Here are a few of my favorite offensive zone faceoff options. Remember, it is up to the centerman to make sure everyone is ready, and on the same page before the puck is dropped. I recommend naming your faceoff plays so the communication is quick and simple before the draw.

Enjoy!

Technorati Tags: Faceoff, Offensive Zone, Options, Puck